2022 BMC Teammachine SLR 02

The BMC Teammachine SLR02 Disc gives riders the same top of the line engineering as BMC’s most accomplished bike at less than half the cost. The BMC Teammachine SLR02 weighs about a pound more than the SLR01 but with the same design, it is ready help you perform at a high level for a fraction of the cost. Equipped with Shimano RS-370-TL wheels, this road bike is built for performance and comfort.
Like the SLR01, the SLR02 frame geometry was created by the ACE Technology supercomputer. Tens of thousands of iterations of the frame were considered before settling on the frame with a perfect combination of compliance and speed. That ideal frame iteration features asymmetrical tubing to help a rider find the perfect position for maximum efficiency.
The BMC Teammachine SLR02 Disc TWO is built for comfort and compliance while still allowing you to reach high speeds. The Teammachine SLR02 Disc TWO can navigate hills and cobblestone without eliminating speed or comfort. Using BMC’s Tuned Compliance Concept (TCC) and a premium carbon build, it performs well in the toughest conditions.
The BMC SLR02 Disc frame has an altered fork which compensates for wind forces and the thru-axle. BMC was able to find the perfect way to accommodate a disc fork without adding an excessive amount of weight. A super light flat mount is also featured to reliably secure the brakes without adding too much mass. If rain starts falling in the middle of you ride, have no fear. These disc brakes will perform at their best and help keep you safe.
The BMC Teammachine SLR02 Disc TWO comes with the sleek minimalist design that is often used by BMC. Both the general appearance of the bike and its engineering stay true to BMC’s simple but attractive appearance. For riders that choose to use Shimano Di2, the junction box will be tucked away. While the SLR02 may appear simple from a distance but the elegant design and engineering will be noticed upon closer inspection.

FRAME SPECIFICATIONS

• Frame: 12x142mm thru-axle
• Fork: 12 x 100mm thru-axle; Disc-specific; Tapered steerer: 1-1/8” to 1-1/2”
• Seatpost: 15mm offset (0mm offset available)
• Tires: Designed for 25mm, maximum 28mm
• Frame Weight: 1045g
• Fork Weight: 405g
• Seatpost Weight: 195g
• Misc.: Light Thru-Axle Design (F&R=70g)